Yakai Precision Machinery (Yantai) Co., Ltd
Starting from the demands of customers, developing with products offering continuous maximum benefits
Add to Cart
Specification:
| Category | Unit | YTCT01 | YTCT02 | YTCT04 | YTCT06 | YTCT08 | YTCT08S | YTCT10 | YTCT17 |
| Length | mm | 300-450 | 520-542 | 581-610 | 760 | 920-955 | 950-1100 | 965-1100 | 1005-1150 |
| Width | mm | 150-250 | 260-266 | 265-283 | 351-454 | 450-483 | 445-493 | 543-572 | 602-666 |
| Height | mm | 225-270 | 312 | 318 | 400 | 512 | 512-540 | 585 | 560-615 |
| Arm Width | mm | 82-180 | 155-172 | 181-205 | 230-317 | 290-345 | 300-350 | 345-425 | 380-480 |
| Pins Center Distance | mm | 20-45 | 40-45 | 45-55 | 50-70 | 70-90 | 90 | 90-100 | 100-110 |
| Cylinder Stroke | mm | 95-200 | 200-300 | 300-350 | 340-440 | 420-510 | 450-530 | 460-560 | 500-650 |
| Vertical Pins Center Distance | mm | 170-190 | 200-210 | 205-220 | 240-255 | 300 | 320 | 350-370 | 370-380 |
| Weight | kg | 30-40 | 50-75 | 80-110 | 170-210 | 350-390 | 370-410 | 410-520 | 550-750 |
| Working Pressure | kg/cm^2 | 30-400 | 30-400 | 30-400 | 30-400 | 30-400 | 30-400 | 30-400 | 30-400 |
| Necessary Flow | I/mins | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 |
| Suitable Excavator | ton | 1-4 | 4-6 | 6-8 | 12-16 | 18-25 | 25-26 | 26-30 | 30-40 |
* The Parameter above may change with the technology improvement, will not notice additionally, please understand.
Features:
1. Use high-strength materials; Suitable for all kinds of models from 1-40 Ton.
2. Use the safety device of the hydraulic check valve to ensure safety;
3. The excavator configuration parts need not be modified and can be replaced without removing the pin shaft, so the installation is rapid and the work efficiency can be greatly improved.
4. There is no need to manually smash the bucket pin between the crushing hammer and the bucket. Gently move the switch for ten seconds to complete the exchange between the bucket and the crushing hammer, saving time, labor, simple and convenient.
5, mainly used in the need to frequently replace the excavator front-end working device in the workplace, in the long-term use of a device is to try not to install.
